BWF winches

Winches of highly compact construction, hydraulic axial piston motor drive, complete with control valves for the load on lowering and for the negative brake opening control that are built into the cover closing the motor. Inside the winch is installed the Brevini planetary gear reducer incorporated into the spindle.

The support structures can vary from simple pantograph metal sheet to innovative square shaped castings. They have no radial encumbrance in the zone of the rope out feed drum, for he entire rotation of 360 degrees. These winches are suitable to the most varied requirements of direct pull and high rope speed, with quite compact axial dimensions, for example crane behind cab for trucks or similar applications.

Some models are equipped with a system to control the minimum capacity of the rope on the drum, with hydraulic or electric control. Performance ranging from a first layer direct pull of 1150daN for the BWF1000 to 7500daN for the BWF6000.

Use the table below to help you select the winch which suits your requirement and then go to downloads to get the dimensional and specification information on your chosen winch. The table is sorted in descending order by line pull (daN) on the outside layer.

Larger rope capacity available on an outside layer if required with reduced line pull performance.

* Value not complying with Machinery Directive 2006/42/CE "Annex I" Paragraph 4.1.2.4. related to rope with tensile strength Rm=1960 N/mm2

Technical Data

Line pull first layer:   1,150 … 7,500 kg

Certifications: Certification ISO 9001

Sectors: Marine Technologies | Hoisting & Cranes Technologies | Mobile Technologies